Steam gasification of waste tyre: Influence of process temperature on yield and product composition

An experimental survey of waste tyre gasification with steam as oxidizing agent has been conducted in a continuous bench scale reactor, with the aim of studying the influence of the process temperature on the yield and the composition of the products; the tests have been performed at three different temperatures, in the range of 850–1000 °C, holding all the other operational parameters (pressure, carrier gas flow, solid residence time). The experimental results show that the process seems promising in view of obtaining a good quality syngas, indicating that a higher temperature results in a higher syngas production (86 wt%) and a lower char yield, due to an enhancement of the solid–gas phase reactions with the temperature. Higher temperatures clearly result in higher hydrogen concentrations: the hydrogen content rapidly increases, attaining values higher than 65% v/v, while methane and ethylene gradually decrease over the range of the temperatures; carbon monoxide and dioxide instead, after an initial increase, show a nearly constant concentration at 1000 °C. Furthermore, in regards to the elemental composition of the synthesis gas, as the temperature increases, the carbon content continuously decreases, while the oxygen content increases; the hydrogen, being the main component of the gas fraction and having a small atomic weight, is responsible for the progressive reduction of the gas density at higher temperature.     

Evaluation of Direct-Oxidative DNA Damage on Human Lung Epithelial Cells Exposed to Urban Airborne Particulate Matter

Airborne particulate matter (PM) extracts were investigated for their content of organic compounds and for the direct and oxidative DNA damage induced on lung epithelial cells A549. PM₁₀ was seasonally collected at two monitoring sites (Stations 1 and 2), characterized by different traffic loads. The cells were exposed for 30 min to extracts of PM₁₀ diluted at 0.025%, 0.05%, and 0.1% for summer samples, and at 0.05%, 0.1%, and 0.15% for winter samples. Oxidative and direct DNA damage were evaluated by formamidopyrimidine glycosylase (fpg) comet assay analyzing tail moment (TM) values from fpg-enzyme-treated cells (TMenz) and enzyme untreated cells (TM) respectively and by comet percentage analysis. Measurements relating to Station 2 showed higher levels of polycyclic aromatic hydrocarbons (PAHs), and their methyl-(methyl-PAHs) and nitro-(nitro-PAHs) derivatives in both the seasons. Nitro-PAH concentrations were higher in summer than in winter at both the stations. We found a significant increase of comet percentages at the highest dose of extract from both stations in summer and from Station 2 in winter. The TM and TMenz values relative to the summer sampling showed an early oxidative DNA damage induction also followed by direct DNA damage more evident at Station 2, that seems to correlate with the presence of higher nitro-PAH concentrations during the warm season. At both monitoring stations, the results from winter sampling campaign showed a direct DNA damage induction at 0.1% of extract and oxidative-direct DNA damage at the highest dose (0.15%).     

Optimal design of pump-and-treat systems under uncertain hydraulic conductivity and plume distribution

In this work, we present a stochastic optimal control framework for assisting the management of the cleanup by pump-and-treat of polluted shallow aquifers. In the problem being investigated, hydraulic conductivity distribution and dissolved contaminant plume location are considered as the uncertain variables. The framework considers the subdivision of the cleanup horizon in a number of stress periods over which the pumping policy implemented until that stage is dynamically adjusted based upon new information that has become available in the previous stages. In particular, by following a geostatistical approach, we study the idea of monitoring the cumulative contaminant mass extracted from the installed recovery wells, and using these measurements to generate conditional realizations of the hydraulic conductivity field. These realizations are thus used to obtain a more accurate evaluation of the initial plume distribution, and modify accordingly the design of the pump-and-treat system for the remainder of the remedial process. The study indicates that measurements of contaminant mass extracted from pumping wells retain valuable information about the plume location and the spatial heterogeneity characterizing the hydraulic conductivity field. However, such an information may prove quite soft, particularly in the instances where recovery wells are installed in regions where contaminant concentration is low or zero. On the other hand, integrated solute mass measurements may effectively allow for reducing parameter uncertainty and identifying the plume distribution if more recovery wells are available, in particular in the early stages of the cleanup process.     

An experiment in the electrokinetic removal of copper from soil contaminated by the brass industry

The feasibility of electrokinetic remediation of copper-contaminated soil was evaluated following eight days of electroreclamation. The results indicate that electrokinetic reclamation of Cu is totally ineffective in soil composed primarily of clay minerals and organic matter. The strong absorption of copper by this kind of soil, in our view mainly a result of retention by the clay component, makes it resistant to mobilization by the electrogenerated acidic front as well as by citrates (the competitors of natural chelating agents, i.e., humates). Such conditions, while adverse for the electroremediation process, may cause this kind of soil to act as a natural barrier to the leaching of copper ions.     

Increased levels of polychlorobiphenyls in Italian women with endometriosis

Endometriosis has been hypothesised to be linked to persistent and toxic organochlorinated chemicals. Dioxins and dioxin-like compounds have in particular been associated with the disease, mainly on the basis of experimental studies. Data in women are conflicting. A case-control study on 80 Italian nulliparous women of reproductive age was carried out to assess whether there is a correlation between the presence of endometriosis and blood levels of polychlorobiphenyls (PCBs), a family of ubiquitary environmental pollutants which comprises congeners with dioxin-like activity. Higher levels of PCBs were found in women with endometriosis. A mean cumulative value of 410 ng g(-1), lipid base, was found in cases versus the value of 250 ng g(-1) observed in the control group (odds ratio for upper tertile 4.0, CI 95% 1.3-13; p = 0.0003). PCB increase involved both dioxin-like (PCBs 105, 118, 156, and 167) and non-dioxin-like congeners (PCBs 101, 138, 153, 170, 180).     

Polychlorobiphenyls and other organochlorine compounds in human follicular fluid

Based on observations in animals, there is an increasing evidence that a number of persistent organochlorine pollutants can alter the endocrine homeostasis, this resulting in toxic effects in particular in the developing organism. However, the role of these chemicals in determining endocrine-related diseases in humans, and possibly a decrease of fertility, is still controversial. Exposure data concerning the human reproductive system are essential for risk assessment. Based on this, the occurrence in follicular fluid of polychlorobiphenyls (PCBs), 2,3,7,8-chlorosubstituted polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs), 1,1,1-trichloro-2,2-bis(4-chlorophenyl)-ethane (p,p'-DDT) and its metabolites, and hexachlorobenzene (HCB) was investigated. With respect to PCBs, the sum of the three most abundant congeners (PCBs 138, 153 and 180) was 1230 ng/g, lipid basis (0.37 ng/g, wet weight). Congener distribution profile overlapped what is usually observed in other human tissues, as blood and milk. PCDDs, PCDFs, p,p'-DDT and 1,1-dichloro-2,2-bis(4-chlorophenyl)-ethane (p,p'-DDD) were below their determination limits. 1,1-dichloro-2,2-bis(4-chlorophenyl)-ethene (p,p'-DDE) and HCB were detected in concentrations respectively in the order of 700 and 70 ng/g, lipid basis (approximately 0.2 and approximately 0.02 ng/g, wet weight).     

Risk curve boundaries

Insights into the science and the dynamics associated with the stimulus-injury relationship of the human system are often gained by focusing on the results obtained from human surrogate testing. These results are commonly mapped into an injury risk paradigm for the purpose of characterizing the stimulus injury response: the injury risk curve. However, the quality and quantity of the data along with the experimental design are critical factors when considering the value of the estimated risk curve. Presented in this article is an analysis of injury risk curves in terms of their usability and appropriateness with respect to the sample size, stimulus distribution over the critical range, censoring, shape of the underlying risk function, and the inclusion of "actual" (uncensored) along with censored data. The results from this analysis indicate that for "large" biomechanical injury data sets there is no advantage to using actual data; censored data will yield the same injury risk curve as actual data. However, for "small" biomechanical injury data sets the inclusion of actual data will significantly improve the quality of the resulting risk curve. In addition, the results show that the amount of injury data needed to generate a risk curve with a given confidence bound is not only dependent on the relative contribution of the censored data and actual data but also on the shape of the risk function along with the stimulus distribution over the critical range. Confidence intervals are presented for the thoracic injury risk and the head injury risk to show the influence of data distribution on the goodness of the risk function estimation.     

PCDDs, PCDFs, PCBs and DDE in edible marine species from the Adriatic Sea

Edible marine species from several areas of the Adriatic sea were analyzed for their content in persistent organic pollutants (POPs), such as polychlorinated dibenzodioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), and pp'-DDE (dichlorodiphenyldichloroethylene), a metabolite of the organochlorine pesticide dichlorodiphenyltrichloroethane (DDT). On the whole, PCDD/F contamination levels were low. In general, I-TEQ findings were greater for those species at higher levels in the trophic web (mackerel > red mullet > anchovy). Contamination levels were within 0.23 and 1.07 pg TEQ/g fw (fresh weight) in the aforesaid species, while all remaining species exhibited contamination levels ranging from approximately 0.07 to 0.25 pg TEQ/g fw. Besides, TEQ cumulative findings in species from the northern area were in general greater than those from the central and southern areas. PCB cumulative findings in the samples also revealed a detectable difference in contamination levels in species obtained from the northern, central, and southern sampling sites, between 7.6 and 177, 2.3 and 157, and 4.5 and 94 ng/g fw, respectively. The greatest PCB concentrations were found in mackerel (94-177 ng/g fw). Finally, DDE concentration levels varied from 0.7 to 32.4 ng/g fw. The highest levels of contamination were found in mackerel, red mullet and anchovy (17.7-32.4 ng/g fw, 8.1-9.8 ng/g fw, and 6.4-11.9 ng/g fw, respectively).